Kone global leader in elevator and escalotor wanted to kmow if any malfunction is happening in elevtor.This is done using BMS(BUilding Management) and BACnet protocol

This project was done using BMS (Building management system) and gives all record of events or fire happening on Morlay IAS panel.

tocolZX (Fire)panel is used with gateway interface which gives same information as ZX panel. Zx panel were used in network.This project done using modbus TCP/IP protocol

Morlay IAS Is Honeywell's fire alarm system. Its addressable fire system having 4 zones. This system gives alarm when there is fire in any zone or smoke

3 parking sensors used to sense to sense data from parking space and Arduino collects data from sensors and sending it to Raspberry pi as a getaway. Raspberry pi sends data to cloud. Available parking space is stored in MySQL database and user gets information of available parking space and parks the vehicle accordingly.

KONE, the global leader in the Elevator and Escalator industry, wishes to adopt new BACnet standard specific to Elevators and Escalators. KONE would like to implement native support for BACnet in its KONE Interface Controller (KIC) which will enable integration with BACnet compliant BMS

The client wishes to develop a lightweight web-based GUI application to monitor and configure basic parameters (read, write, alarms, etc.) of the devices on the BACnet network. The application should push the data on the web/cloud. Viking Controls wish to have remote access of BACnet network over the internet through web and mobile devices. Viking Controls also prefers a system without any additional hardware, if possible. The system should be secured

Worked for 3 different regions (Belgium, Netherland and Luxemburg) of Morley IAS fire alarm system for different output devices Apollo, Hochiki, system sensor etc.

Worked for project Modbus gateway interface with ZX and Esser Fire panelIts a Modbus Gateway communication with Honeywells ZX panel and Esser panel using TCP/IP protocol. Honeywells EPKS (SCADA) is used as GUI.

The project was done to integrate Honeywells ZX Networked panel with Building management system (BMS) and VisualeyezModbus TCP/IP on Ethernet used to communicate with BMS systems over LANSerial RS-232 used to communicate with Visualeyez